Service manual

62−11389

SECTION 5 − MICROPROCESSOR INTERFACE

PARAGRAPH NUMBER Page

5.1 INTERFACE METHODS 5−1..........................................................

5.2 TECHNICIAN INTERFACE 5−1........................................................

5.2.1 Configuration Mode 5−2...........................................................

5.2.2 Component Test Mode 5−2........................................................

5.2.3 Service Mode 5−3................................................................

5.3 PC MODE 5−3.......................................................................

5.4 PC CARDS 5−4......................................................................

5.4.1 Handling PC Cards 5−4...........................................................

5.4.2 Program PC Card 5−5............................................................

5.4.3 Configuration PC Card 5−6........................................................

5.4.4 Option PC Card 5−6..............................................................

5.4.5 Download PC Card 5−6...........................................................

5.5 REEFERMANAGER & REPORTS 5−6..................................................

5.5.1 Introduction 5−6..................................................................

5.6 MICROPROCESSOR DISPLAY DIAGNOSTICS 5−8......................................

5.7 MICROPROCESSOR REPLACEMENT & SETUP 5−8....................................

5.7.1 Pre-Replacement Steps 5−9.......................................................

5.7.2 Microprocessor Replacement 5−9..................................................

5.7.3 Microprocessor Setup 5−10.........................................................

5.7.4 Configurations Via Keypad 5−11.....................................................

5.7.5 Functional Parameters Via Keypad 5−11.............................................

5.7.6 DataLink Data Recorder Via ReeferManager 5−11.....................................

5.7.7 Microprocessor Final Checkout 5−11.................................................