User's Manual

Spanish, ES DO LU MA MI JU VI SA

French, FR DI LU MA ME JE VE SA

z If you receive no RC-DCF frequency signal, the time zone should be

set to 0. Time Zone is used in countries which can received the DCF

frequency signal but the time zone is different from German Time ( i.e.

GMT+1)

Note:

(1) Second adjusted to zero only.

(2) The Time Setting Mode will automatically exit in 15 seconds without

any adjustment.

8.3 12/24 Hour Display mode:

Press “(12/24)” button (B2) to select 12 or 24 hours mode.

8.4 Daily Snooze Alarm Function:

z Press “MODE” button (B5) to select to view :

Time Weekday Alarm Time (“AL” Shown on the

LCD)

z When viewing the Alarm Time, hold “MODE” button (B5) for 3

seconds to enter Alarm Time setting. Press “-” (B4) or “+” (B2) button

to adjust the alarm time. Press “MODE” button (B5) to confirm the

setting.

z Press “ALARM” button (B1) to switch alarm on or off. If it is on, “ ”

shown on the LCD.

z When Alarming, press “SNOOZE / LIGHT” button (B3) to activate the

snooze alarm, (“

” flash on the LCD). The alarm will snooze for 5

minutes, then it alarms again. This snooze function can be enabled

for maximum 7 times.

z Except “Snooze” button, press any button to stop the snooze alarm.

8.5 Dual Time Setting Function

z Press “MODE” button (B5) to select to view :

Time Weekday Alarm Time Dual Time (“DT” shown on

the LCD)

z When viewing the Dual Time, hold “MODE” button (B5) for 3 seconds