User's Manual

Spanish, ES DO LU MA MI JU VI SA

French, FR DI LU MA ME JE VE SA

z The zone is used for the countries where can receive the DCF signal but the time zone is

different from the German time.

z When the country time is faster than the German time for 1 hr, the zone should be set to 1.

Then the clock will automatically set 1 hour faster from the signal time received.

12/24 Hour Display mode:

y Press “+(12/24)” button (B4) to select 12 or 24 hours mode.

Snooze Alarm Clock Function:

z Press “MODE” button (B1) to select to view :

Time Alarm Time (“AL“ Shown on the LCD)

z When viewing the Alarm Time, hold “MODE” button (B1) for 3 seconds to enter Alarm Time

setting. Press “ +” (B4) or “-” (B7) buttons to adjust the alarm time.

z Press “ALARM ON/OFF” button (B4) to switch alarm on or off. If it is on, “ ” shown on

the LCD.

z When Alarming, press button B1, B2, B3 or B4 to stop alarming.

Outdoor Thermo Sensor Unit Registration Procedure:

z The main unit automatically starts receiving transmission from Outdoor Thermo Sensor for

outdoor temperature after are Weather condition setting .

z The thermo sensor will automatically transmit temperature to the main unit after batteries

inserted. Batteries compartment (D4) of thermo sensor is locating behind the back cover,

unscrews to open.

z Press “ TX “ button (D6) on the thermo sensor unit to transmit temperature & humidity to the

main unit manually. The main unit gives a “beep” sound if it received the temperature.

Thermometer:

z Press “-(°C / °F)” button (B7) to select Indoor/Outdoor Temperature in Celsius mode/

Fahrenheit mode.

z If the temperature is out of the measurable range, LL.L ( beyond the minimum temperature) or

HH.H (beyond the maximum temperature) will be shown on the LCD.

Temperature Alert function:

z Hold “ ALERT” button for 3 seconds to enter Temperature Alert setting, Temperature’s digits

flash. Press “

” button to select the ALERT for outdoor temperature or Indoor Temperature.

Then press “ALERT” button to confirm the selection.

z Press ““▲ ” or “ ” button to set the upper ” ” and lower “ ” limit of the temperature.

Press “ALERT “button to confirm the setting.

z Press “ ALERT” button to set the Temperature Alert function on or off ( “ ” appears on the