User's Manual
“ ” flashes indicate now is receiving WWVB time signal
“ ” turns on indicate signal received successfully
Manual Time Setting:
l Hold “ MODE” button (B4) for 3 seconds to enter Clock/Calendar setting Mode
when viewing the Time.
l Press “+” (B8) or “-” (B9) buttons to adjust the setting and press “MODE” button
(B4) to confirm each setting.
l The setting sequence is shown as follow: Hour, Minutes, Second, Year,
Month/Day sequence, Month, Day, DST on or off.
l The Time Setting Mode will automatically exit in 5 seconds without any
adjustment.
12/24 Hour Display mode:
Ÿ Press “ 12/24” button(B8) to select 12 or 24 hours mode.
Time Zone Setting:
Ÿ Hold “ALARM ON/OFF “ button (B3) for 3 seconds to select the 4 difference
USA time zone. Indicated by“ ” on LCD
Snooze Alarm Clock Function:
l Press “ MODE” button (B4) to select to view:
Time Alarm Time1 (“ “ Shown on the LCD) Alarm Time 2
(“ “ Shown on the LCD)
l When viewing Alarm Time 1 or Alarm Time 2, hold “MODE” button (B4) for 3
seconds to enter that Alarm Time setting. Press “ +” (B8) or “-” (B9) buttons to
adjust the alarm time.
l When viewing Alarm Time 1 or Alarm Time 2, press “ALARM ON/OFF” (B3)
button to switch that alarm on or off. If it is on, “ ” or “ ”shown on the
LCD.
l When Alarming, press “SNOOZE / LIGHT” button (B1) to enable the snooze
alarm. Snoozes alarm snoozes for 5 minutes, then it alarms again.
l Press any button to stop the snooze alarm.