User's Manual

4
5. Installation
5.1 Main Unit
The main unit can be placed onto any flat surface (C3), or wall
mounted by the hanging hole (C1) at the back of the unit.
5.2 Outdoor Thermo sensor
The remote sensor should be securely mounted onto a horizontal
surface.
Note: Transmissions between receiver and transmitter can reach up to
30m in open area. Open Area: there are no interfering obstacles
such as buildings, trees, vehicles, high voltage lines, etc.
6. Weather Forecast Function
6.1 Operation
z After Batteries inserted, or holding “WEATHER” button (B7) for 3
seconds, weather icon flash (A2) on the LCD. Enter the current
weather by pressing “-” (B9) or “+ “(B8) button. Press “WEATHER” (B7)
button to confirm the setting. The weather forecast may not be
accurate if the current weather entered is not correct.
z The current weather status should be entered again if the altitude of
the Main Unit is changed. (Barometric pressure is lower at higher
altitude location. Therefore, altitude change will affect the weather
forecast). The weather station will start the first forecast at 6 hours
later after the current weather status is entered.
6.2 Weather Conditions
There are totally 5 different weather status animations in the weather
forecast.
Sunny Slightly Cloudy Cloudy
Rain
Freezing or Snow