User's Manual

z Stopscanningbyholding“ ”button(B4)for3seconds.

7.2ManualTimeSetting:
z In time display mode, hold “MODE” button (B3) for 3 seconds to enter
Clock/CalendarsettingMode.
z Press“+”(B2)or“”(B4)buttontoadjustthesettingandpress“MODE”button
(B3)toconfirmeachsetting.
(Bykeepingthe“
+”(B2)or“”(B4)buttonpressed,couldacceleratetheprocess
andreachthedesiredvaluemorequickly)
z Thesettingsequenceisshownasfollow:Hour,Minute,Second,Year,Month/Day
sequence,Month,Date,DST
Note: 
(1) All Setting mode will automatically exit in around 15 seconds without any
adjustment
(2) ForTime Zone:the default settingis zone “E”.By holding “+” (B2) button for3
secondstoadjusttootherzones“P”“M”or“C”.
(3) DST:WhenDSTfunctionisactivated,andit’sinDaylightSavingMode(RCCsignal
withDST)“DST”wouldbeshownontheLCD.

7.3DailyAlarmFunction:
z Press “MODE” button (B3) to select to view alarm Time, “AL” shown on the
display
z WhenviewingtheAlarmTime,hold“MODE”button(B3)for3secondstoenter
AlarmTime setting.Press“+” (B2) or“” (B4)buttontoadjustthe alarmtime.
Press“MODE”button(B3)toconfirmthesetting.

7.4SnoozeAlarmFunction:
z Press“ALON/OFF”Button(B6)toactivateordeactivatethealarm.Ifthealarmis
on,alarmicon"  "appearsonthedisplay.
z Whenalarmalerts,except“SNOOZE”button,pressanybuttontostopthealarm.
Otherwise, the alarm signal sounds for about 2 minutes, then stops
automatically.
z Press“SNOOZE”(B1)buttonwhenalarmalerts.Thealarmsnoozesforaround5
minutes, then it alerts again.“
” flashes on the LCD during the snooze time.
Thisprocesscanberepeated7times. 

7.5  12/24HourDisplaymode: