User's Manual

z Press“12/24”(B2)buttontoselect12or24hoursmode. 

8.Thermometer
8.1Temperaturedisplay
z Press “°C/°F” (B4) button to select Temperature in Celsius mode/ Fahrenheit
mode.
z If the temperature is out of the measurable range, LL.L (beyond the minimum
temperature)orHH.H(beyondthemaximumtemperature)willbeshownonthe
LCD.

8.2TemperatureAlertfunction
z Press“ALERT”button(B7) toset theOutdoorTemperatureAlert function onor
off,“ ”appearsontheLCDiftemperaturealertfunctionisactivated.
z Hold “ALERT” button (B7) for 3 seconds to enter outdoor temperature alert
setting,upperlimiticon“
”flashonthedisplay.
z Press“+”(B2)or“”(B4)buttontosettheupper” ”andlower“ ”limitofthe
outdoortemperature.Press“ALERT”button(B7)toconfirmthesetting.

9. The use of temperature probe
z Insert the probe plug (D8) to the jack on the right hand side of the Thermo
SensorUnit.
z Puttheprobeoutsideandleavethethermosensorunitinindoorareatoavoid
freezingupthebatterywhentheoutdoortemperatureisbelow4F.
Alwaysusethetemperatureprobetosensethetemperaturewhenthe
temperatureisbetweenthefollowingrange:58F~4Fand+122F~+158F

10.Low battery indication:
Thelowbatteryicon“ ”turns onthe display(besidetheoutdoor temperature
digit), indicatingthatthermosensorinlowbatterystatus.Thebatteriesshouldbe
replaced. 


11.Precautions

z Useapintopresstheresetbutton(B5)iftheUnitdoesnotworkproperly.
z AllSettingModeswillautomaticallyexitin15secondswithoutanyadjustment.
z Theclocklosesitstimeinformationwhenthebatteryisremoved.