Multimedia Navigation System Quick Start Guide Ford Mustang *FOR MODELS WITH FORD SYNC® ONLY Navigation Bluetooth Hands-Free (For use with Sync) iPod® and MP3 compatible (For use with Sync) Back-up camera included Play Audio CDs and MP3 Discs Play Audio CDs and MP3 Discs (For use with Sync) Supports steering wheel controls Customizable backgrounds Satellite Radio (For use with Sync)
NOTICE OF INTENDED USE Some features of CarShow Systems are not intended for viewing by the driver when the vehicle is in motion, such as movie playback. When using navigation, minimize the amount of time spent viewing the screen and use voice prompts as much as possible. Avoid prolonged use of the touch screen controls. Such use might distract the driver or interfere with the driver’s safe operation of the vehicle, and thus result in serious injury or death. Such use might also violate state or local laws.
For complete Owner’s and Navigation Manuals, please visit CarShow Electronics online at www.CarShowElectronics.
The Basics System Basics Vehicle ignition must be On or in ACC Mode to operate system. When the vehicle is turned off, the unit will automatically turn off. • DISP: Press to dim backlight/ turn display off • NAV: Enter/Exit Navigation • MENU: Reference OEM Owners Manual AUX • Sync Source: Reference OEM Sync related source Screen Organization Your system will automatically default to the last screen you were on prior to turning off the unit. The Information Bar is located at the top of the screen.
Functions Most functions on the CarShow unit are controlled by SYNC or the Factory buttons. Please refer to your Factory Owner’s Manual for all other instructions. AM/FM Radio Touch to change station. Long Press: To set preset. Short Press: To go to specific preset. E Note: Factory presets are covered up and not accessible Satellite Radio (If Equipped) Touch to change station. Long Press: To set preset. Short Press: To go to specific preset.
Functions Bluetooth Your phone will need to be paired by using SYNC. Please refer to the Factory SYNC manual for instructions. On the CarShow unit, you will be able to dial phone numbers and receive calls. All other Bluetooth functions will be accessed through the Factory Bluetooth.
Navigation Before operating your CarShow Navigation system, please carefully read and follow the instructions provided in the “Safety Information and Precautions” located on the inside back cover of this Quick Start Guide. Entering Navigation To access navigation, press the NAV button on the unit. To exit navigation, you will need to press the same NAV button. Start Up When the navigation software starts, you will see the reminder warning to use your navigation software safely and lawfully.
Understanding the Map The top part of the screen shows you what the next street is and which direction to turn on your route Select the Quick Menu to access the most used functions These displays show you the distance, time left and the estimated arrival time of your trip Shows you the street you are currently on Access the Navigation Menu Find an address or Point of Interest and access the Favorites and History menu Displays the route details and allows you to edit, change or cancel existing route Disp
Quick Menu Located in the top right corner of the map screen is the Quick Menu. In this screen, there is a selection of functions that are frequently needed during navigation. You can use this option to search for places of interest along the way of your route, such as: Gas Stations, Restaurants, Parking, etc. Modifying Existing Routes You can modify an existing route by accessing either the Quick Menu or Main Navigation menu You can use this option to select an alternative route to your destination.
Enter or Find Address If you are on the Map screen, press MENU. In the Navigation Menu, select Find Address. Note: By default, the software proposes the country and state where you are currently located. 1. Touch “City Name” and the keyboard screen will appear. 2. Your current city will automatically default. To search for a different city, start typing each letter of the City name Tap to confirm city 3. A “Select City” screen will appear. This will show a list of cities that match your selection.
5. Start typing each letter of the street name. 6. A Street Name list will appear. Select the one you are looking for. 7. Repeat these steps for House number, or if you do not know it, you can select the SELECT STREET option. 8. A map will appear. Click Next and a short summary of the route will flash on the screen for a few seconds. 9. After the summary, the map appears showing the entire route. Tap to start your journey.
Setting Favorites You can set Favorite destinations (like Home, etc) so you do not have to enter it manually each time. -Once you have entered all information and press DONE, in the next screen, you will select MORE -Select ADD TO FAVORITES -It will take you to keyboard where you can rename your favorite. (Example: HOME) -Select DONE and you Favorite is now saved. Route History You can search through the History menu to access past routes or to set a past route as a Favorite.
Adjusting the Time Zone To adjust the time displayed on the unit, please use the steps below. 1. Press MENU in the bottom left corner of the screen 2. Select SETTINGS ---->REGIONAL ---->Time Zone 3. Now you are in the clock setting screen. -Use can set the time zone to change automatically when entering a new time zone.
Map Settings You can modify and customize the way your maps are displayed by accessing the Map Settings From the map screen select the Quick Menu button.
Safety Information and Precautions WARNING! Please read and follow the following safety precautions. Failure to follow the instructions below may increase your risk of collision and personal injury. The Rosen Navigation software is not a substitute for your personal judgment. The route suggestions should never supersede any local traffic regulation or your personal judgment and /or knowledge of safe driving practices.
CS1014 Rev A All rights reserved.
