User manual

G
33CARSON X8E Chassis 500409015 / 500409016
Technical Data Motor and ESC
Connect the ESC, motor, receiver, battery and
servo according to the following diagram.
Positive (+) and negative (-) wires of the ESC are connected with the
batterypack.
A, B and C are connected with the motor wires. The control cable of
the ESC (wires in black, red and white colour) is connected with the
throttlechannelofthereceiver(usuallyCH2).
The A, B, C wires of the ESC can be connected with the motor wires
freely(withoutanyorder).
Ifthemotorrunsintheoppositedirection,pleaseswapanytwowire
connections.
4S – Connection/Cabling
7,4 V
Lipo
7,4 V
Lipo
DRAGSTER 4S DRAGSTER 6S
Brushless Motor:
Motor Sensorless Sensorless
U/min 1980UpV 2000UpV
U/min @ 14,8 V 29.304 44.400
Short term 80A 120A
Dimensions (A- Ø x L) 36 mm Ø x 66 mm L 40mmØx74mmL
Brushless ESC:
Forward yes yes
Reverse yes yes
Input voltage 2-4 LiPo-cells 2-6 LiPo-cells
Speedcontroller
Motor
Red wire to the positive of the ESC
Black wire to the
negative of the ESC
Receiver