User manual

G
44 CARSON X8E Chassis 500409015 / 500409016
Trouble Shooting ESC Brushless
Trouble Possible reason Solution
After power on, motor doesn’t work Theconnectionsbetweenbatterypackand
ESC are not correct
Check the power connections Replace the
connectors
After power on, motor doesn’t work, but
emits “beep-beep-, beep-beep-” alert
tones
(Every group of “beep-beep-” has a time
interval of 1 second)
Input voltage is abnormal, too high or too
low
Überprüfen Sie die Einstellung für die Batte-
Check the adjustment of the voltage of the
batterypack
After power on, red LED always lights, the
motor doesn’t work
Throttle signal is abnormal Plug the receiver wire into the throttle chan-
nelofthereceivercorrectly
The motor runs in the opposite direction
when it is accelerated
The wire connections between ESC and the
motor are not correct
Swapanytwowireconnectionsbetweenthe
ESC and the motor
The motor suddenly stops running The throttle signal is lost Check the transmitter and the receiver
The ESC has entered the “Low voltage protec-
tion mode” or “Over-heat protection mode”
Red LED flashing means “Low voltage protec-
tion”.Pleasereplacebatterypack.
Green LED flashing means “Over-heat protec-
tion”, please stop running to cool the ESC.
When accelerating quickly, the motor
stops or trembles
Thebatteryhasabaddischargeperformance Useabetterbattery
The “Start mode (Punch)” of the ESC is too
aggressive
Select a softer option for the “Start mode
(Punch)”