User manual

GB // 28

BATTERY MOUNTING

Caution

• Donotmixoldandnewbatteries/rechargeablebatteries.

• Donotmixdifferenttypesofbatteries.

• Donotchargenon-rechargeablebatteries.

Remove the cover.

Close the battery-case.

Put fresh AA Mignon batteries with correct polarity into the

battery-case.

INPUT KEY FUNCTION

S/N Identification Function

1 Throttle control/lever for turning (Mode 1)

Throttle control/lever for left/right (Mode 2)

Moving the control lever forwards or backwards makes the copter climb or dive. By

moving the control lever to the left or right, the copter will turn left or right,(Mode 1)

or will move to the left or right (Mode 2)

2 Right control lever Moving the control lever forwards or backwards makes the copter move forwards or

backwards. By moving the control lever to the left or right, the copter will move left

or right,(Mode 1) or will turn to the left or right (Mode 2)

3 Roll trim Roll trim adjusts left and right drift.

4 Pitch trim Pitch trim adjusts forward and backward movement.

5 Yaw trim Yaw trim adjusts left and right rotation.

6 Throttle trim Throttle trim adjusts ascent and descent.

7 On/Off power switch Pushing up switches on the power transmitter, pulling down switches it off.

8 Stunt button Push this button to perform flips and loops.

9 Switch for professional mode and headless

function

Pressing this button briefly changes the agility. Pressing it for a longer period acti

vates/deactivates the headless mode.