User Manual

MICROMAX LED

INSTRUCTIONS FOR USE

MM-200

The MicroMax LED is a portable, pocket microscope (with LED light) equipped with two knobs that

independently adjust the magnification (marked "zoom") and the clarity of image (marked "focus").

The "zoom" knob adjusts the focal length, which in turn determines the magnification. By turning

the knob wheel, you can change the magnification of the item being viewed from 60x to 75x times

closer.

The other wheel marked "focus" adjusts the clarity of the image once a power range is established.

Simply turn the focus knob while viewing an object until the image becomes clear and crisp. It may

be necessary to re-focus the image when viewing an object if the magnification is changed during

the viewing.

The switch that powers the LED lamp is located at the end opposite the viewing lens. It is

recommended that this light be turned on at all times while using the device for optimum viewing

results. The LED lamp is powered by three G3 button cell batteries that are already installed.

It is also important to note that the image you see will be inverted. This is perfectly normal and is

common in all high magnification tools such as microscopes and telescopes.

LED LIGHTED ZOOM MICROSCOPE

PDF : www.carson.com/MM200guide

English / Français / Español / Deutsch / 日本語