User's Manual
Sybox 2 manual (AI-08.01)
Page 4 of 6
Page 4 of 6
B. Installation
The twisted pair cable with the male DB15 connector comes out of the carrier.
All signals are available at the four DB9 socket connectors Iso1 .. Iso2. Each connector offers
all four signals. They all have the same pin assignments.
plug in the DB15 connector into the Sybox connector marked “TransPC”
connect one or two connectors from your electronic interfaces to the Iso1 .. Iso2
connectors
Details for connecting your computer or your system
The length of Iso connector cables should not exceed 25 cm.
The HDMI connectors are used for synchronizing two AG501
systems .
Please ask bahne@articulograph.de if you have any problems.
Figure 5: Sybox 2 connection of two synchronized AG501 systems
Pin
Signal
1
not connected
2
PSR_dn
3
Attention
4
Sweep
5
T_active
6
ground
7
internal*
8
internal*
9
internal*
Table 1: Iso# connections