User's Manual

AG501 cs5cal (PD-02.05)
Page 2 of 11
II. Calibrating the sensors with Cs5cal
A. Mounting the Circal
Fig.1: The Circal disc
Fig.2: After mounting
Fig.3: Note the notch
Get the Circal disc and put it into the hole of the Circal. Then screw it on by turning the white wheel of
the Circal disc. Note the notch (Fig.3) which determines the mounting position.
Please do not fix the Circal too tightly. Just a notch beyond smooth turning of the Circal will suffice.
B. Mounting the sensors
Fig.4: The first magazine, front view …
Fig.5: … top view