User's Manual

AG501- sound recording (PD-07.05)
Page 16 of 20
2. Connecting
Connect the adapter (Figure 35) to one of the 9-pin connectors of the Sybox2
Connect the Sybox cable (Figure 38) which is connected with the E-Box to the 15 pin socket of the
Sybox.
Figure 41: Sybox2 connection
Plug the microphone into mic input2 of the Tascam US-2x2 sound board.
Connect the black plug of the adapter cable (the one labelled ‘sweep’) with the respective end of the
sweep – line in adapter (Figure 37)
Connect the Sweep – Line input adapter with the left Line input of the Tascam US-2x2 sound board
Figure 42: sweep - adapter connection
3. Power supply for Sybox-Opto4
Connect the phone jack of the power supply with the black connector of the adapter which is marked
“+5V power”.
Figure 43: Power supply connection for Sybox-Opto4