User's Manual

AG501- sound recording (PD-07.05)
Page 18 of 20
III. Software settings & trouble shooting
A. Monitor sound recording
To activate sound recording in cs5recorder select the record audio data-option (Figure -45).
Figure 45: Audio recording in cs5recorder
Normally it says "found 2 peaks". This means that during the last sweep, the start and stop peak was
correctly detected.
With the show audio level-button it is possible to show and adjust the audio level (Figure -46). Please
note: The window must be closed using Ctrl-C before the recording of data is started. Otherwise, the
sound recording will fail.
Figure 46: Audio recording in cs5recorder
B. Data storage
The synchronized data are stored within separate folders within the Control server
data/recorder/”sessionname”/wav
The full sound data including the synchronization signal are stored in the folder wav.all
1
2