User's Manual

AG501- sound recording (PD-07.05)
Page 4 of 20
2. Connecting
Connect the adapter (Figure3) to one of the 9-pin connectors of the Sybox
Connect the Sybox cable (Figure 6 ) which is connected with the the E-Box to the 15 pin socket of the
Sybox.
Figure 9: Sybox connection
Plug the microphone into mic input2 of the alesis sound board.
Connect the black plug of the adapter cable (the one labeled ‘sweep’) with the respective end of the
sweep – line in adapter (Figure 5)
Connect the Sweep – Line input adapter with the left Line input of the Alesis sound board
Figure 10: sweep - adapter connection
3. Power supply for Sybox-Opto4
Connect the phone jack of the power supply with the black connector of the adapter which is marked
“+5V power”.
Figure 11: Power supply connection for Sybox-Opto4