User Manual

User Manual DPM-816 PRO Page 8
Cleaning the device
To remove dust from the device case or the sensor, use a soft,
dry cloth. Do not use cleaning agents containing organic solvents.
Storage conditions
Store the device in a warm and dry place away from direct
sunlight. Do not leave the battery inside the device during long
term storage.
Do not leave the device near strong sources of magnetic fields,
for example, near magnets, power supplies or electric motors.
Do not store the device in hot, humid or dusty environments, or in
environments containing corrosive chemical substances.
Display
The device has an informative LCD display with a backlight that
automatically turns off. It shows the coating thickness, mode,
method, measurement units and other parameters.
Although the LCD display is manufactured using FSTN
technology with a wide operating temperature range, it may
refresh slower in low and high temperatures.
Sound signal
The device has a distinct sound signal for each measurement
method. This allows the user to quickly identify the type of metal