Specifications

Section 0 for location of the Cockpit Washdown con-
~ nection}. This system allows utilization ofthe surround-
ing sea water for cleaning purposes. A special hose is
provided that has two male ends.
One end connects to
the cockpit
or aft deck female fitting. If desired, a nozzle
can be connected to the other end. After con necting the
hose, activate the pump by means
of the Washdown
Switch; normally located in the cockpit area.
Periodically, clean the in-line filter of any debris that
may have accummulated. This filter is located
in the
bilge area.
A valve is provided on the Washdown
thru-hull water
intake fitting. Be sure this valve is
in the open position
when the Washdown System is to be used.
OMSB
G3
CARVER