Specifications
J-7
SWIM
PLATFORMS on the platform. An anchor retainer bracket and clevis
are included to secure the anchor while not
in
use. See
}
Carver offers a fiberglass swim platform with ladder for Figure
J1
for bow pulpit and anchor mounting informa-
all models.
The
transom
of
the boat must be properly tion.
reinforced for the swim platform installation. See a
Carver dealer for additional information. J-9 FIRE EXTINGUISHER SYSTEM
A self-contained, Halon fire extinguisher system is
standard equipment on 27' models and
is
available as
an
option on 21'thru 25' mocels. The equipment utilized
has been
so
chosen, and located, to provide sufficient
volume and coverage
of
the entire engine compart-
ment. While the Halon system ensures excellent
overall bilge fire protection,
it
does not eliminate the
U.S.C.G. requirement for hand-held fire extinguishers.
Carver dealers can provide additional information re-
garding the Halon Fire Extinguisher Systems. Also,
boats equipped with Halon Fire Extinguishers may be
eligible for insurance discounts.
Ifthe boat had a Halon Fire Extinguisher System factory
installed, the information provided by the system manu-
factu rer is included.
J-B
BOW
PUPLITS
The Carver bow pulpit is designed for standing on while
anchoring. Most
"Danforth" style anchors can be stored
BRACKET & PIN
BOW ROLLER
BOW PULPIT
The U-bracket is to be centered on the pulpit and situated in such a positon on the pulpit so as
to
accommodate the anchor.
Ideally, the bracket should be located so that the spring lock pin can
be
Slipped through the shank eye
when the anchor is drawn
up
on the pulpit and is lying flat.
ANCHOR SHANK
SPRINGLO~
:.-----.-;-
U-BRACKET
-------
___
____II
(Top
View)
FIGURE
J1
•
BOW
PULPIT
U-BRACKET
&SPRING
LOCK
PIN
OMSB
J3
CARVER