Owner's Manual

CARVIN ENGINEERING DATA BRX BASS SYSTEMS
76-27900C 1208
BRX10.4
• 4 heavy-duty 56 oz cast frame 300w 10” woofers
• 1” Titanium compression HF tweeter
• 1” Titanium compression HF tweeter• Impedance: 4 ohms, power
handling: 1200 Watts
• Reproduces Frequencies from low B (28 Hz to 22k Hz)
• Frequency response 35 to 18kHz +/- 5DB
• Sensitivity: 104DB @ 1w/1m and 135DB @ 1200W
• Caster insert sockets
• Size: 24.5” wide x 18” deep x 27.75” high
• Weight: 96 lbs
BASS CABINETS
BRX10.2
• 2 heavy-duty 56 oz cast frame 300w 10” woofers
• 1” Titanium compression HF tweeter
• 6-position horn attenuation: -3, -6, -12, -24dB, off, or full on
• Impedance: 4 ohms, power handling: 600 Watts
• Reproduces Frequencies from low B (28 Hz to 22k Hz)
• Frequency response 35 to 18kHz +/- 5DB
• Sensitivity: 101dB @ 1w and 129 dB @ 600w
• Size: 24.5” wide x 15” deep x 17” high
• Weight: 57 lbs
Congratulations on your selection of the BRX bass system.
Carvin’s BRX series delivers tight bottom end, crisp articulation,
and accurate tonal reproduction. The BRX series feature state-of-
the-art low frequency drivers with tight, smooth high frequency
Titanium compression drivers. These models can work as a stand
alone cabinet reproducing the full bass guitar range from the deep
tones of a low B string to the snap of a G string slap. The BRX18.1,
featuring one cast 18” large magnet 800w woofer, offers the finest
in extended high power low frequency reproduction. The BRX series
cabinets incorporate multiply wood construction for high efficiency
and road worthiness. Every BRX cabinet is equipped with large
caster plates to add casters for easy transport.
Receiving inspection
INSPECT YOUR SPEAKER FOR ANY DAMAGE which may have occurred during
shipping. If any damage is found, please notify the shipping company & CARVIN.
SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to
re-ship your unit, always use the original carton and packing material. CARVIN
and the shipping company are not liable for any damage caused by improper
packing.
SAVE YOUR INVOICE. It will be required for warranty service if needed in the
future.
SHIPMENT SHORTAGE. If you find items missing, they may have been
shipped separately. Please allow several days for the rest of your order to
arrive before inquiring.
RECORD THE SERIAL NUMBER on the enclosed warranty card. Return the
warranty card with your name and comments to us.
USA customers register online at: www.carvin.com/registration
All other countries register online at: www.carvinworld.com/registration
12340 World Trade Drive, San Diego, CA 92128
800.854.2235 carvin.com
c
USA LIMITED WARRANTY
For all other customers, see carvinworld.com for warranty information.
CARVIN products are warranted against defective materials and workmanship for 1 YEAR. 3 YEARS for
DCML & HD Series Power Amps, Active & Passive Loudspeakers, 5 YEARS for Guitars, Basses & Cobalt
Series. 90 DAYS for Tubes shipped with amps, Wireless Systems & Speaker Components (purchased as
individual parts).
The Limited Warranty will be void (not covered) under the following conditions: a) any modied product,
b) speakers with burnt, damaged or open voice coils, c) moisture, d) salt/smoke/contaminants, e) natural
disasters, f) accidents, g) abuse, h) lack of reasonable care, or i) damaged caused to speakers or horn drivers
caused by this unit. This warranty is in lieu of all other warranties expressed or implied. No representative
or person is authorized to represent or assume for CARVIN any liability in connection with the sale of servicing
of CARVIN products. CARVIN shall not be liable for incidental or consequential damages.
For USA warranties, CARVIN will provide its own service and parts at no charge providing the Customer in-
cludes “proof of purchase” (receipt or invoice) and the unit is returned in the original carton. If covered
under warranty: 1 to 90 days, Carvin pays ground shipping both ways. 91 days to 365 days, customer
pays shipping to Carvin, Carvin pays return ground shipping. Over one year, customer pays shipping
both ways.
For USA service, go on line to carvinservice.com and complete the “RMA Repair Form”. Ship item including
RMA Form and allow up two 2 weeks for CARVIN to receive. You will be contacted by email. If not covered
under warranty, a “Flat” service fee is available, or if we are no longer servicing the unit, you may be
eligible for a new, similar unit for a discount.