User Guide

TCS215 TCS215

TCS215

TCS115

Figures 1-5 show a few different array/mounting configurations possible with the TCS

series loudspeakers.

Fig. 1 is a bottom side view of a 360° array of sixteen TCS210 cabinets with an addi-

tional two TCS210’s used for a downfill application. TCS hardware needed for this appli-

cation is as follows:

(8) TH50 truss bar kit, (8) TH56 truss bar connector 45°, (56) TH10 3/8-16 forged steel

eyebolts, (36) 3/8-16 forged steel quick links.

Fig. 2 is a top side view of a 360° array of sixteen TCS210 cabinets. TCS hardware

needed for this application is as follows: (8) TH50 truss bar kit, (8) TH56 truss bar con-

nector 45°, (48) TH10 3/8-16 forged steel eyebolts, (32) 3/8-16 forged steel quick links.

Fig. 3 is a side view of a small array of three TCS215’s with one pulled back for downfill.

TCS hardware needed for this application is as follows: (1) TH50 truss bar kit, (1) TH57

pull back bar kit, (11) TH10 3/8-16 forged steel eyebolts, (7) 3/8-16 forged steel quick

links.

Fig. 4 is a side view of a small array consisting of one TCS215 and one TCS115 sus-

pended at the 45° angle for downfill. TCS hardware deeded for this application is as fol-

lows: (1) TH58 mounting bar kit, (6) TH10 3/8-16 forged steel eyebolts, (2) TH5 3/8-16

forged steel quick links.

Fig. 5 is a 60° array of TCS215’s constructed at a 24° angle. TCS hardware needed for

this application is as follows: (3) TH50 truss bar kit, (2) TH56 truss bar connector 24°,

(18) TH10 3/8-16 forged steel eyebolts, (12) 3/8-16 forged steel quick links.

Fig 5

Fig 3

TH50

Fig 4

TH58

TH57

TH50

TH55

TH50 TH50

Top view of 360° array

using (8) TH50 and (8)

TH56 kits. Total of 8

loudspeakers needed.

Top view of 360° array

using (15) TH50 and

(15) TH55 kits. Total of

15 loudspeakers

needed.