User's Manual

CONTROLS AND DISPLAYS
19
REAR PANEL
LEFT
LEFT
RIGHT
RIGHT
ANALOG AUDIO INPUT
ANALOG 7.1 INPUT
7.1 PREAMPLIFIER OUTPUT
7.1 PREAMPLIFIER OUTPUT
RS 232
1
IR INPUT ZONE
TRIGGERS
123
ZONE 2
AUDIO
OUT
FL
SL CEN
SBL
FR
SR
SW
SBR
FL
FL
SL
CEN SBL
SBL
FR
FR
SR
SR
SW
SW
SBR
SBR
A C PO WER
[ ] 117V 50/60 Hz
[ ] 220V 50/60 Hz
Cinema 11a Surround Sound Processor
CARY AUDIO DESIGN
12345
1
324
678
56 78
DIGI TAL I NP UT
AUTO
SETUP
MIC- IN
FM
75
AM LOOP
ANTENNA
ZONE 2
DIGITAL
OUT
SL CEN
HDMI 1 INPUT
HDMI 2 INPUT
HDMI OUTPUT
2
12
12
3
4
5
6
7
8
9
10
11
13
14
151617
18
19
1. ANALOG AUDIO IN (INPUT 1) XLR (L + R)
• Use these jacks for connection to balanced CD or DVD player analog output connections.
2. ANALOG AUDIO IN (INPUTS 2 THROUGH 8) RCA
• Use these jacks for connection to CD, DVD, TV, or VCR input options.
3. ANALOG AUDIO 7.1 INPUT
• By connecting a DVD audio player, SACD multi channel player, or other component that
has a multi-channel output, you can playback the analog audio with 5.1 channel or 7.1
channel outputs.
4. 2
ND
ZONE ANALOG AUDIO OUT
• These jacks supply the analog stereo audio outputs to an external audio amplifier used to
power the speakers in the remote zone.
5. 7.1 PREAMPLIFIER OUTPUTS
• Use these jacks to connect to the main five- or seven-channel power amplifiers.
6. 7.1 PREAMPLIFIER OUTPUTS XLR
• Use these jacks to connect to the main five or seven channel power amplifiers.
7. AC INLET CONNECTOR
• Plug the power cord into this AC inlet and then into the power outlet on the wall.
8. DC TRIGGER OUTPUT TERMINALS
• Connect devices that need to be triggered by DC + 12V. (Screen, curtains, lights, etc.)
9. IR INPUT
• Use the 1 and zone 2 Ext remote jacks to connect external IR sensors. When the unit is
installed where it is not otherwise visible to the remote, connect an optional, external
sensor and the 1 (Main) jack will be activated. The Cinema 11a should be used for
connections to the power amplifiers for the main room speaker. The device connected to
the zone trigger will only be activated when the Multi-Zone system is turned on. Connect
it to the amplifier used to power the speakers in the second zone (Zone 2).