Owner`s manual

4
SPECIFICATIONS ___________________________________________________
This section describes the basic specifications of the Cinema 2, 5 and 7B power amplifiers at the time of
printing. Specifications are subject to change without notice or obligation. When the following cautionary
terms are used in this manual, these definitions apply:
WARNING
Electrical hazard! Misuse or failure to follow instructions properly may result in personal injury
or death!
CAUTION
No risk or personal injury; however, misuse or failure to follow instructions may result in
damage to equipment.
NOTE
No risk of personal injury or equipment damage; however, misuse or failure to follow
instructions may prevent proper performance of the equipment.
........................................................................................................................................................................................................................
RATED POWER OUTPUT
Cinema 2, 5 200 watts/channel - 8 ohms, Class A/B
350 watts/channel – 4 ohms
Cinema 7B 100 watts/channel – 8 ohms Class A/B
160 watts/channel – 4 ohms
........................................................................................................................................................................................................................
DAMPING FACTOR >100 @ 8 Ohms
........................................................................................................................................................................................................................
PEAK CURRENT Cinema 2, 5 - 35 amps
Cinema 7B - 20 amps
........................................................................................................................................................................................................................
FREQUENCY RESPONSE
Cinema 2, 5 10 to 50 kHz +/-0.1 dB
Cinema 7B 5 Hz to 40 kHz +/-0 dB @ 1 watt
5 Hz to 100 kHz +0/-3 dB @ 1 watt
........................................................................................................................................................................................................................
INPUT POWER 117 or 234 VAC @ 50/60 Hz, depending on market
REQUIREMENTS
........................................................................................................................................................................................................................
POWER CONSUMPTION Idling with no signal input:
Cinema 2 – 90 Watts, Cinema 5 – 155 Watts, Cinema 7B - 115 Watts
All channels, 8-ohm load, full power:
Cinema 2 – 1000 Watts, Cinema 5 – 2500 Watts, Cinema 7B - 1700 Watts
........................................................................................................................................................................................................................
INPUT IMPEDANCE
Cinema 2, 5 44 K ohms for single-ended RCA inputs