Owner`s manual

CONTROLS AND DISPLAYS

FRONT PANEL

1. POWER

• Press once to turn the power ON. The power indicator will blink for thirty (30) seconds

and then stay on, at which point the unit is ready to operate.

• Press again to turn the power OFF.

2. HEADPHONE JACK

• This jack is used to listen to headphones.

3. SOURCE SELECTOR

• The input source is selected by pressing the respective buttons.

4. ALPHANUMERIC Display

• This thirteen-character display provides a wide range of information concerning the

operation of the SL-100. The information displayed depends on what the SL-100 is

doing.

• The information displayed is summarized below:

Normal Operation: Displays the selected input name and volume setting.

Balance Mode: This shows the direction (L or R) and magnitude of the balance offset.

5. VOLUME

• Use the volume control to adjust the listening level.