Owner`s manual

CONTROLS AND DISPLAYS

FRONT PANEL

1. POWER

•

Press once to turn the power ON.

•

Press again to turn the power OFF. The amplifier will enter STANDBY and the blue

POWER LED will light.

2. HEADPHONE JACK

•

This jack is used to listen to headphones.

3. SOURCE SELECTOR

•

The input source is selected by pressing the respective buttons.

4. ALPHANUMERIC Display

•

This thirteen-character display provides a wide range of information concerning the

operation of the SLP 03. The information displayed depends on what the SLP 03 is

doing.

•

The information displayed is summarized below:

Normal Operation: Displays the selected input name and volume setting.

Balance Mode: This shows the direction (L or R) and magnitude of the balance offset,

from channel to channel.

5. VOLUME

•

Use the volume control to adjust the listening level.

6. POWER INDICATOR (Standby)

•

This indicator lights when the amplifier is switched into standby mode.