User's Manual

7. System Mode
ϒ
Simple Weighing Mode: Display the weight after weighing
.
ϒ
High Low Weight Comparing Mode: Decide that the weight is high,
normal or low value and perform the display
.
ϒ
Count Mode: Display the quantity by setting the unit or sample
weight.
ϒ
Count
Χ
omparing Mode: Perform the display after discrimination by
setting HIGH/LOW quantity.
(1) Mode Conversion
€
Press
key for 3 sec and it is displayed the
following message.
€
Execute depending on the below mode conversion and setting
method.
(2)
Digit Input Method
Input the digit in use of the below keys.
key: Used to escape from mode.
↑
↑↑
↑
key: Used to increase the first place of value by
one.
←
←←
←
key: Used to set current value
⋅
10.
↵
↵↵
↵
key: After completing the input, it is moved to next
mode.
key: Used to set the inputted value to '0'
γ
Conversion method
As you press , the mode change.
If it is completed, it will start the mode which is set by mode
conversion.
ZERO
MODE
LIGHT
PRINT
ZERO

Weighing W-
Count- Enter End
S Y S


  