TALENT CASE’ ASSEMBLY INSTRUCTIONS Thank your for selecting one of our pieces to become part of your home. We are here to guide you during the assembly. if vou need help or need extra hardware simply contact our support team at com or cal us at BOO) 652-6344. Mon-Fri 9:00am 5:00pm EST. Valenti Casey is Registered Trademark distributed by Casablanca Home WARNING: DO BOT LEAVE CHILDREN UNATTENDED WHILE TIMETABLING OR OPERATING THE MOTORIZED TABLE THIS IS NOT A TOY or AND SHOULD HOT 88 MANAGED BY CHILDREN.
TALENT CASE’ STEP 3 Place the frame upside down & on top of a blanket or foam: STEP 4 Then place the base on top and align the four {4) holes of the base with the four (4) holes on the frame STEPS Insert screw Ma x 12mm and tighten if with the Hex key provided. STEP & Flip the fable STEP 7 Adjust the bottom levelers if the table is not leveled. STEP 8 Open Rox #1; Main center top. Turn it upside down and screw the 4 level wheels all the way to the and.
TALENT STEP 10 Remove the four {4} plastic tie raps and make sure the extension bars are down CASE’ STEP 9 wn Place the center glass on top of the rails and make sure the pins inside the four (4) cy the frame. . STEP 11 Locate the key hole under ¢ the table, insert the safety 7 key and turn on power | Instruct the user this key is for CHILD SAFETY. STEP 12 Extend the label extensions by pressing and holding the buttons on the table or on the remote STEP 13 a Unpack Box #2; the side extensions.
TALENT CASE’ STEP 18 Place each extension carefully on top of the natal frame, align the sides with the center top. STEP 18 Tighten the extensions with the M8 Cap screw. STEP 17 Tighten center top with small Hex key provided TROUBLESHOOT MANUAL 1. Locate the receiver and battery pack box from under the table 2.Make sure power is on. Then unscrew only highlighted screws, this will release the box out B.Locate the white plastic box (Remote receiver). To program the remote we first must reset the memory.
