fms ASSEMBLY INSTRUCTIONS hank your for selecting one of our pieces to become part of your home. We ara have to guide you during the assembly. If you need help or need extra hardware simply contact our support team at support@casabiancafurniture com or call us at BOO) 652-6344, Mon-Fri 8:00am 5:00pm EST. Valenti Casey is Registered Trademark distributed by Casablanca Home.
TALENT] CASE STEP 3 Place the motorized frame upside down on top of a blanket or foam. Then place the wooden base and metal plate on top of the frame and align with the 4 holes 0 an the drama STEP 4 Insert long screw starting from the metal plate thru the wooden base to the motorized frame Tighten after inserting the 4 screws into position STEP EB After inserting the 4 long screws tighten with the Hex key provided STEP 7 Adjust the bottom levelers if the table is not leveled.
TALENT CASES STEP 9 Place the center glass on Sig i} top of the rails and mike Daren sure the pins go Inside the four {43 cylinders aft i the frame. : STEP 10 Remove the four (4) plastic tie raps and make sure the extension bars are down. STEP 11 Locate the key hole under the table, insert the safety | key and turn on power, Instruct the user this key is for CHILD SAFETY. STEP 12 Extend the able extensions by pressing and holding the buttons on the table or on the remote.
TALENT CANE STEP 15 Place each extension carefully an top of the tal frame. align the sides with the center tap. STEP 16 Tighten the extensions with the M8 Cap screw. STEP 17 Tighten center top with small Hex key provided TROUBLESHOOT MANUAL 1 Locate the receive: box from under the table. 2 Make sure power Is on. Then unscrew only highlighted screws, this will release the box out. Equivocate the white plastic hox (Remote receiver) To program the remote we first must reset the memory.