User Guide

10
OPTIONAL W-80 WALL CONTROL OF THE FAN & LIGHT
OPTIONAL 3-SPEED W-40 WALL CONTROL
•The fan may be turned ON and OFF
by the W-80 wall control.
•The lights may be turned ON and
OFF by the W-80 and the inten-
sity adjusted from low to high.
•The fan must be supplied with two
independent 120V AC supply
wires.
• Set the FAN pull chain switch to
the HIGH speed setting.
•Turn the lights ON at the fan.
•The W-80 allows the choice of four
(4) different speed settings.
•The W-40 allows the choice of four
(4) different speed settings.
•No light fixture is used.
• Set the FAN pull chain switch to
the HIGH speed setting.
•No changes in household or fan
wiring are required.
•The fan may be turned ON and OFF
by the W-40 wall control.
CAUTION! Failure to set the pull-chain
speed to HIGH can result in faulty
operation of the fan and damage to
the W-40 wall control. To confirm fan
is set to HIGH: Turn W-40 fan speed
switch to 'HI' - set fastest fan speed
with pull chain.
CAUTION! Failure to set the pull-chain
speed to HIGH can result in faulty
operation of the fan and damage to
the W-80 wall control. To confirm fan
is set to HIGH: Turn W-80 fan speed
switch to 'HI' - set fastest fan speed
with pull chain.
R