User Guide

ManualsBrandsCasablanca Fan Company ManualsOtherC3U72M

INTRODUCTION

Before You Start 2

Safe Use 2

MOUNTING RECOMMENDATIONS

General Guidelines

.........................................................................................................................................................

Sloped Ceiling Installations

............................................................................................................................................

FAN INSTALLATION

Getting Started

...............................................................................................................................................................

Crossbar Mounting Bracket Installation

.........................................................................................................................

Lag Screw Installation

....................................................................................................................................................

Canopy Installation

.........................................................................................................................................................

Fan Preparation

...............................................................................................................................................................

Blade Installation

............................................................................................................................................................

Switch Housing Bracket / Cap Installation

....................................................................................................................

Hanging the Fan

.............................................................................................................................................................

Canopy Electrical Connections

.......................................................................................................................................

Canopy Hatch Installation

..............................................................................................................................................

VERSA

•

TOUCH2™ CONTROL

Control Bracket Installation

..........................................................................................................................................

Remote Operation

.........................................................................................................................................................

Changing Transmitter Frequency Setting

.....................................................................................................................

Changing Transmitter Frequency Setting ..................................................................................................................... Changing Transmitter Frequency Setting

TROUBLESHOOTING TIPS

..........................................................................................................................................

CARE RECOMMENDATIONS

......................................................................................................................................

AUTHORIZED SERVICE CENTERS

...........................................................................................................................

PRODUCT SPECIFICATIONS

.......................................................................................................................................

ASSEMBLY DIAGRAM

...................................................................................................................................................

READ AND SAVE THESE INSTRUCTIONS!

SAFETY FIRST: Safety and the proper operation of your Casablanca fan both require a thorough knowledge of the product

and proper installation.  erefore, before attempting to install and operate your Casablanca fan, read this Owner’s Manual

completely and carefully. Retain the manual for future reference

C343010 AA1005

Before You Start 2

Safe Use 2

CONTENTS

OWNER’S MANUAL

Summary of content (16 pages)

PAGE 1
OWNER’S MANUAL READ AND SAVE THESE INSTRUCTIONS! SAFETY FIRST: Safety and the proper operation of your Casablanca fan both require a thorough knowledge of the product and proper installation. Therefore, before attempting to install and operate your Casablanca fan, read this Owner’s Manual completely and carefully. Retain the manual for future reference CONTENTS INTRODUCTION Before You Start Safe Use 2 2 MOUNTING RECOMMENDATIONS General Guidelines ..........................................................
PAGE 2
INTRODUCTION BEFORE YOU START • CAUTION: Risk of electrical shock! All wiring must be in accordance with the National Electric Codes and the appropriate local electrical codes. The National Codes require proper grounding as a precaution against electrical shock. A qualiﬁed electrician should be consulted if you are unsure. • This fan is designed to be installed on an existing electrical outlet box. The outlet box must be UL Listed for ceiling fan installations, if it is not, a new box must be installed.
PAGE 3
MOUNTING RECOMMENDATIONS GENERAL GUIDELINES Before mounting your Casablanca fan, read the following helpful recommendations. The location of the fan, air circulation, and fan size are all important factors to consider before installation. Location Ceiling fans have practical uses in almost every room in your home. We suggest you follow these mounting recommendations as you decide where to install your Casablanca fan. • This fan requires a minimum ceiling height of 9 feet.
PAGE 4
FAN INSTALLATION GETTING STARTED Installing a New Ceiling Fixture Outlet Box If you do not have an existing ﬁxture located where you wish to place your Casablanca fan, an approved ceiling ﬁxture outlet box must be installed and wired. WARNING: To reduce the risk of fire, electrical shock, or personal injury, mount to outlet box marked “Acceptable for Ceiling Fan Support” using the mounting hardware provided with the outlet box.
PAGE 5
LAG SCREW INSTALLATION NOTE: We recommend that the ceiling box be of suﬃcient capacity to support the weight of the fan and light ﬁxture under any conditions. Step 2. With the large washer attached, pass the lag screw through the center hole of the crossbar mounting bracket and screw into guide hole. Tighten until outlet box is mounted ﬁrmly to beam. This box must be secured to the ceiling ﬁrmly.
PAGE 6
FAN PREPARATION IMPORTANT SAFETY INFORMATION! Before starting the installation of your ceiling fan, install the threaded downrod into the motor coupling and lock the assembly Prepare for fan installation as follows: Step 4a. Place the motor cover on the downrod as shown. Perma•Lock™ Downrod and Ball Assembly Motor Wires Step 4b. Route the wires from the motor through the Perma•Lock™ downrod and ball assembly.
PAGE 7
BLADE INSTALLATION BLADE HARDWARE (not to scale) Blade Holder Blade Blade Holder Screw (2 per blade) Blade Screw and Washer Step 5a. Remove the five shipping blocks attached to the rotating motor plate using the provided Phillips screwdriver. Blade Screw and Washers (4 per blade) Step 5b. Attach each blade to a blade holder by first pressing the blade badge into the blade, then threading four blade screws into the screwholes and tightening using the screwdriver. Repeat for each blade assembly.
PAGE 8
SWITCH HOUSING BRACKET/ CAP INSTALLATION SWITCH HOUSING BRACKET/CAP HARDWARE (not to scale) Switch Housing Cap Switch Housing Bracket (2) Step 6a. Take the two switch housing bracket you removed in step 4g and snap it into the holes in the switch housing. This is to prevent any wires getting pushed down near the motor. Make sure no wires are in the way or pinched in these NOTE: If you have purchased an accessory light ﬁxture for this fan, please refer to the instructions included with the light ﬁxture.
PAGE 9
HANGING THE FAN Step 7a. To hang the fan body in the canopy, hold the fan body ﬁrmly and insert the ball into the canopy opening. Check that no wires were pinched. Rotate the fan body until the slot in the ball ﬁts into the pin opposite the canopy opening. Step 7b. Trim excess motor wires, leaving at least 6 inches above the downrod. Strip 1/2-inch insulation from the end of each wire using a wire stripper (available at your local hardware store). Ball Slot Pin CANOPY ELECTRICAL CONNECTIONS Step 8.
PAGE 10
VERSA•TOUCH2™ INSTALLATION VERSA•TOUCH2™ INSTALLATION HARDWARE (not to scale) W-73 Control Holder W-73 12v Battery Drywall Anchor 6-32 (2) Wood Screw 1" (2) Screw 6-32 X 3/8" (2) Screw 6-32 X 1" (2) CONTROL BRACKET INSTALLATION SAFETY FIRST: To reduce the risk of electrical shock, this fan must be installed with an isolating wall control/switch. CAUTION! Do not use with wall dimmer.
PAGE 11
REMOTE OPERATION Fan Control To start the fan. Press the selected speed button to run the fan at the desired speed. 1=Low speed 2=Medium speed 3=High speed To turn oﬀ the fan. Press the FAN OFF button. Airﬂow Direction To reverse the airﬂow press the REVERSE button. Reverse operates at any speed whether fan is on or oﬀ. The fan returns to its set speed after reversing. Light Control Turn the light on or oﬀ independently from the fan by pressing the UP LIGHT DOWN LIGHT OR BOTH button.
PAGE 12
TROUBLESHOOTING TIPS Please refer to this guide before requesting service or contacting your dealer for assistance. PROBLEM POSSIBLE REMEDIES Fan will not start • Check the main circuit fuses, circuit breakers, and wall switch position. Check all wire connections. Make sure the power is turned oﬀ during this inspection. • The 9-pin connector is not making good contact. Check the 9-pin connector in the receiver mounted in the switch housing (see receiver diagram on page 11). • The battery is weak.
PAGE 13
CARE RECOMMENDATIONS Fan Finishes • For cleaning, a soft brush or lint-free cloth should be used to prevent scratching the ﬁnish. • A vacuum cleaner brush nozzle can remove heavier dust. • Surface smudges or an accumulation of dirt and dust can be removed easily by using a mild detergent and slightly dampened soft cloth. An antistatic agent may be used, but never use abrasive cleaning agents as these will damage the ﬁnish. Blades • Wood-ﬁnish blades should be cleaned with a furniture polishing cloth.
PAGE 14
AUTHORIZED SERVICE CENTERS STATE/CITY ZIP SERVICE CENTER NAME PHONE TYPE ALABAMA MOBILE TUSCALOOSA HUNTSVILLE 36618 35405 35816 AZALEA CITY SERVICE CENTER LTG. & APPL./LIGHTING PLUS SOUTHERN HOME & HEARTH INC. 251-341-0663 205-345-8900 256-534-1715 ALASKA ANCHORAGE 99518 PRIMARY ELECTRIC INC.
PAGE 15
STATE/CITY ZIP SERVICE CENTER NAME PHONE MONTICELLO DES MOINES IOWA (CONTINUED) CARROLL CORALVILLE DAVENPORT 52310 50311 REM ELECTRIC INC. ADVANCED LIGHTING 319-465-3346 515-255-5009 TYPE 51401 52241 52803 J & L ELECTRIC INC. RALSTON CREEK SHAW ELECTRIC INC.
PAGE 16
STATE/CITY ZIP SERVICE CENTER NAME PHONE TYPE OHIO (CONTINUED) MAUMEE DAYTON COLUMBUS CLEVELAND N. OLMSTED NORTH LIMA SOUTH EUCLID DAYTON 43537 45419 43231 44109 44070 44452 44121 45459 K.O.V ELECTRONIC REPAIR LARKIN ELECTRIC CO. THE LAMP LIGHTER WESTSIDE LTG. CTR. CHANDELIER SHACK INC. DICKEY ELECTRIC LAMPSHADER EAST/DBA LTG. EXPO OHIO LAMP & FIXTURE CO.