Radio / CD Casablanca CD50 Operating instructions 023CASABLA
Open here Ouvrir s.v.p.
1 4 3 5 16 15 7 14 13 8 9 PORTUGUÊS 2 ESPAÑOL 6 12 11 10 3 FRANÇAIS ENGLISH
OPERATING ELEMENTS 1 2 3 4 5 6 7 8 9 : ; < = > ? @ 4 button to unlock release panel Volume control ON button, switches the unit on/off, mute RDS button, switches the RDS function on/off Selects display for variable text FM button, selects the FM waveband and the FM memory bank TS, starts the TravelStore function Display button, displays the time DIS, changes display contents MENU button, accesses the menu for basic settings button, opens the flip release panel Cursor button block OK button, confirms me
Adjusting the power-on volume ........ 9 Mute ............................................... 9 Telephone audio/Navigation audio .... 9 Speed-dependent volume adjustment .................................... 10 Adjusting the volume of the beep ... 10 Radio operation...................... 11 Switching to the radio mode .......... 11 RDS function ................................. 11 Selecting the waveband/memory bank .............................................. 11 Tuning into radio stations ...............
IMPORTANT INFORMATION Important information Before you use your car audio system for the first time, please take the time to read the instruction manual carefully and make yourself familiar with the audio equipment. Keep this manual handy in your car for future reference. Traffic safety Traffic safety is always the top priority. Do not attempt to operate your car audio system unless the traffic conditions permit. Familiarize yourself with the equipment before you start driving.
To prevent your car audio system from being stolen, it has been equipped with a removable front panel (flip release panel). Without the front panel, the car audio system is useless to thieves. Protect your car audio system against theft and take the operating panel with you each time you leave the vehicle. Never leave the release panel in the car, even if it is well hidden. The panel has been designed so that it is easy to remove.
SCHWITCHING ON/OFF Switching the car audio system on/off The car audio system can be switched on/off in a number of ways. Switching the car audio system on/ off with the ignition If the car audio system has been connected to your vehicle ignition, it is possible to switch it on and off with the ignition. You can also switch the car audio system on when the ignition is switched off. ➮ Press down and hold 3 until the car audio system switches on.
Volume control Mute The car audio system volume can be adjusted to levels from 0 (off) to 66 (maximum). You can reduce the volume of the car audio system immediately (mute). ➮ To increase the volume, turn the “MUTE” will appear in the display. volume control knob 2 to the left. FRANÇAIS ➮ To decrease the volume, turn the ➮ Press 3 briefly. Selecting the mute level It is possible to select the mute level. Adjusting the power-on volume ➮ Press MENU 8.
VOLUME CONTROL : to select the desired volume level. ➮ Press Adjusting the volume of the beep ➮ Once you have made your selec- For a number of functions you will hear a beep if you press a key for longer than 2 seconds, e.g. if you want to store a radio station on a station preset.You can adjust the volume level of this beep. tion, press MENU 8 or OK ;. Speed-dependent volume adjustment This function automatically adjusts the volume to your driving speed.
Radio operation Tuning into radio stations Switching to the radio mode You can tune into radio stations in a number of different ways. RDS function This car audio system has been equipped with an RDS radio receiver. Many FM radio stations now transmit a signal which contains such other information as the station name along with their regular programming. As soon as the radio station name is detected, it will appear in the display. The RDS function can be switched on or off.
RADIO OPERATION ➮ Press MENU 8. ➮ Press : repeatedly until “SENS” appears in the display. ➮ Press :. The currently selected setting will appear in the display. “SENS HI” indicates the highest level of sensitivity, “SENS LO” the lowest. If you select “SENS LO”, “lo” will light up in the display. ➮ Press : to select the desired sensitivity. ➮ Once you have made your selection, press MENU 8 or OK ;.
: to set the scan time as desired. ➮ Once you have made your selection, press MENU 8 or OK ;. Note: The scan time selected also applies to the SCAN function for theCD player and the CD changer operation. Optimising radio reception Interference-related treble cut (HICUT) The HICUT function improves reception when reception begins to deteriorate. If interference occurs, then the treble and the noise is cut automatically. Switching HICUT on/off ➮ Press MENU 8.
RADIO OPERATION CD PLAYER OPERATION Adjusting the tuner CD player operation This car audio system has been equipped with a multiband tuner. The tuner can be adjusted to accommodate country-specific requirements. The available regions are: America, Europe, Asia and Thailand. The tuner is not fully functional unless it has been set to the country in which it is used. Adjusting the tuner The CD player in this car audio system can be used to play conventional music CDs with a diameter of 12 cm.
To start Cue or Review, ➮ press and hold down either or : until the process begins. Playing tracks in random order (MIX) ➮ Press 5 MIX >. “MIX CD” will appear briefly in the display, the MIX symbol will light up in the display. The next track played will be selected at random. Stopping the MIX function ➮ Press 5 MIX > again. “MIX OFF” will appear briefly in the display and the MIX symbol will no longer light up. OK ;. The track currently scanned will continue playing.
CD PLAYER OPERATION Switching the display mode ➮ To switch the display between the track number and time or the track number and elapsed playing time or track number and CD name, / DIS 7 for longer than press two seconds once or repeatedly until the desired display becomes visible. Naming CDs To help you to identify your CDs more easily, the car audio system allows you to individually name up to 30 CDs. The name can be made up of up to eight letters.
Starting CD changer operation ➮ Press CD•C @ repeatedly until “CHANGER” appears in the display. Playback will begin with the first CD the changer detects in the magazine. Selecting CDs ➮ To select a CD up or down in the magazine, press or : the required number of times. Selecting tracks ➮ To select a different track on the CD currently playing, press or : the required number of times.
CD CHANGER OPERATION changers first play all of the tracks on a CD in random order and then select the next CD in the changer. Stopping the MIX function ➮ To stop the MIX function, press 5 MIX > repeatedly until “MIX OFF” appears briefly in the display and MIX no longer lights up. Scanning all of the tracks on all of the CDs (SCAN) ➮ To scan all of the tracks on all of the CDs in ascending order, press OK ; for longer than two seconds. “SCAN” will appear in the display.
After four seconds you will hear a beep and “DELETE NAME” will appear in the display. ➮ Release MENU 8. The CD name will be deleted. ➮ Press OK ; to return to the menu. Deleting all of the CD names You want to delete all of the names entered for the CDs. ➮ You are listening to a CD. ➮ Press MENU 8. ➮ Press : to select “CDC NAME”. ➮ Press or :. ➮ Press and hold down MENU 8. After four seconds you will hear a beep and “DELETE NAME” will appear in the display.
CLOCK ➮ Press : to alter the minutes. ➮ Once you have altered the min- Displaying the time briefly when the car radio is switched off utes, press :. The hours will begin to flash. To display the time briefly when the car radio is switched off, ➮ Press : to alter the hours. ➮ Press MENU 8 or OK ;. Selecting the 12/24-hour time display mode ➮ Press MENU 8. “MENU” will appear in the display. : repeatedly until “24 H MODE” or “12 H MODE” appears in the display. ➮ Press ➮ Press or play mode.
➮ Press or : to alter the bass. Adjusting the treble ➮ To adjust the treble, press AUD / LD =. “BASS” will appear in the display. : until “TREBLE” appears in the display. ➮ Press ➮ Press or : to alter the treble. ➮ Press AUD / LD = for approx. two seconds. LD will light up in the display to indicate that Loudness is active. Adjusting Loudness intensity The Loudness boost can be set in stages from one to six. ➮ Press MENU 8. “MENU” will appear in the display.
EQUALIZER Equalizer This car audio system is equipped with a parametric digital equalizer. In this case, parametric means that it is possible to individually raise or lower one frequency (GAIN +10 to -20 dB) for each of the five filters. The following filters are available: ● SUB LOW EQ 32 to 50 Hz ● LOW EQ 63 to 250 Hz ● MID EQ 315 to 1250 Hz ● MID/HIGH EQ 1600 to 6300 Hz ● HIGH EQ 8000 to 12500 Hz These filters can be adjusted without the use of measuring equipment.
➮ Press DEQ <. ➮ Press or : repeatedly until “SOUND PRESET” appears in the display. or : to select the desired sound preset. ➮ Press ➮ Press DEQ < or OK ;. Selecting a car preset To further improve the sound properties in your vehicle, you can also select your vehicle type. ● COMPACT ● LIMOUSINE ● VAN ● ROADSTER ● MINI ● TRUCK The settings for these types of vehicles have already been defined. or : to select the desired car preset. ➮ Press ➮ Press DEQ < or OK ;.
Frequency range Sound impression/problem What to do Bass 32 to 100 Hz Bass reproduction too weak Boost the bass with the “SUB LOW EQ”, “LOW EQ” filter Frequency: 50 to 100 Hz Gain: +4 to +6 dB Unclear bass Playback reverberates Unpleasant pressure on the ears Reduce the lower midrange with the “LOW EQ”, “MID EQ” filter Frequency: 125 to 400 Hz Gain: approx.
External audio sources Specifications In addition to the CD changer it is also possible to connect another external audio source to the line output. These sources can include a portable CD player, MiniDisc player or MP3 player. If you have not connected a CD changer, it is possible to connect two external audio sources. You must activate the AUX output in the menu. If you would like to connect another external audio source, you will require an adapter cable.
Service numbers / Numéros du service après-vente / Números de servicio / Número de serviço Deutschland Belgique / België France Nederland Great Britain Danmark Sverige Norge Suomi Österreich EÏÏ¿˜ âeská republika USA Singapore Slovensko Tel.
Radio / CD Casablanca CD50 Installation instructions Notice de montage Instrucciones de instalación Instruções de montagem
Installation instructions • Notice de montage • Instrucciones de instalación • Instruções de montagem GB Safety instructions When carrying out installation work and making connections please observe the following safety instructions: - Disconnect the negative terminal of the battery! When doing so, please observe the vehicle manufacturer’s safety instructions. - Make sure you do not damage vehicle components when drilling any holes.
Durante a montagem e a ligação do aparelho, queira respeitar as seguintes instruções de segurança. - Separar o pólo negativo da bateria! Respeitar ao mesmo tempo as instruções de segurança do fabricante do automóvel. - Quando se procede à furagem de buracos, prestar atenção para não serem danificadas quaisquer partes do veículo. - As secções transversais dos cabos positivo e negativo não devem ser inferiores a 1,5 mm2.
1. Adaptador específico del vehículo, el cual se puede adquirir en el comercio especializado. Cabo de adaptação específico do automóvel que pode ser adquirido no comércio especializado. 12V 4. 2. D C E F 182 165 53 Antenna 1-20 5. A 8 601 910 002 1 2 3. B 1 A 2 6. 7 607 621 . . . Car-specific adapter cable which is available at your dealer. Câble adaptateur spécifique au véhicule, disponible dans le commerce.
7 8 5 6 1 3 4 15 18 14 17 20 3 5 7 4 6 8 1 3 5 7 2 4 6 8 C B A A 1 2 3 4 5 6 7 8 Automatic Sound Radio Mute Sub out Permanent +12V Aut. antenna Illumination Kl.
8. G +12V (max. 150 mA) I Relais RR R F LF LR + + + + - 4 Ohm 4 Ohm 4 Ohm 4 Ohm A Kl.
