SDS

Compact Fluorescent
Safety Data Sheet (SDS)
SDS-001 rev | Issue date: 05.21.19
Section 1. IDENTIFICATION
LONGSTAR LIGHTING Compact Fluorescent Lamps
Xiamen Longstar Lighting Co., Ltd
5 Houbin Road, XiangAn
Xiamen, China 361101
Tel/Emergency Phone Number: 86-592-7073311
[e-mail]
This document pertains to all Longstar CFL items.
Longstar’s CFL Lamps meet the requirements of an “Article” according to 29 CFR 1910.1200. This product is
exempt from OSHA’s Hazard Communication Standard requirements for an MSDS because it meets the definition
of an “article”. An article is a manufactured item: (1) which is formed to a specific shape or design during
manufacture (2) which has end use function(s) dependent in whole or in part upon its shape or design during end
use: and (3) which does not release, or otherwise result in exposure to, a hazardous chemical under normal
conditions of use. Any product which meets the definition of an “article” is exempt from the requirements of the
Standard.
Section 2. HAZARDOUS IDENTIFICATION
GHS classification in accordance with 29 CFR 19100.1200
Not a hazardous substance according to OSHA GHS.
Section 3. COMPOSITION / INFORMATION ON INGREDIENTS
Component
CAS#
Weight
Glass
308066-74-2
99.43
Phosphor Powder (as
nuisance dust)
Yttrium oxide (Y2O3)
1314-36-9
0.12
Barium carbonate
513-77-9
0.1
Manganese carbonate
598-62-9
0.1
Mercury
7439-97-6
0.25
Section 4. FIRST-AID MEASURES
THERE ARE NO KNOWN HEALTH HAZARDS FROM EXPOSURE TO LAMPS THAT ARE INTACT AND USED AS INTENDED.
No adverse effects are expected from occasional exposure to broken lamps. As a matter of good practice, avoid
prolonged or frequent exposure tor broken lamps unless there is adequate ventilation. The major hazard from
broken lamps is the possibility of sustaining glass cuts, apply normal first-aid.
Section 5. FIRE AND EXPLOSION HAZARDS
NOT APPLICABLE TO AN INTACT LAMP THAT IS USED AS INTENDED.
Flammability: Non-combustible Fire Extinguishing: Use extinguishing agents suitable for surrounding fire. If
exposed to extreme heat the plastic and glass components may crack or melt and may release toxic fumes.
Lamp may be electrically conductive.