Use and Care Manual

www.CasablancaFanCo.com

1.888.227.2178

Upper Switch Housing

Screw two switch housing assembly

screws, found in the hardware

bag, halfway into the mounting

plate on the bottom of the motor

housing. It does not matter which

two screw holes you choose.

Make sure the upper switch housing is securely

attached to the mounting plate. Failure to properly

secure all 3 assembly screws could result in the switch

housing xture falling.

Feed the two single-pin connectors

through the center hole of the upper

switch housing, then wrap the keyhole

slots around the screws and twist

counterclockwise.

Insert the third screw, found in

the hardware bag, into place and

then tighten all three screws.