Assembly Instructions

www.CasablancaFanCo.com
1.888.227.2178
M8542-01 • 10/23/17 • © 2017 Casablanca Fan Company
Housing
CONGRATULATIONS!
YOU’RE DONE!
See next page for fan
operation instructions.
Position the notches in the outer rim of
the globe so they line up with the three tabs
on the inside rim of the housing. Carefully lift
the globe up inside the housing as far as it
will go, then rotate the globe clockwise until
it is held tightly in place by the tabs.
NOTE: Check to ensure proper engagement
Notch
Tab
Connect the single-pin connectors from the
LED assembly to the connectors from the fan.
Connect the white wires together. Connect
the blue and black wires together. Tuck the
excess wiring above the LED assembly.
WARNING
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make
sure that glass is properly secured.
15