Troubleshooting guide

Casablanca Fan Co. - Factory Service Department - Technical Library
10
VERSA•TOUCH 2 ( W-72 ) OPERATION
Fan Control
To start the fan, press the selected speed button to run the fan at the desired
speed.
LO=Low speed MED=Medium speed HI=High speed
To turn off the fan, press the FAN OFF button.
Airflow Direction
To reverse the airflow press the REVERSE button. Reverse operates at any
speed whether fan is on or off. The fan returns to its set speed after reversing.
Light Control
Turn the light on or off independently from the fan by pressing the LIGHT
button. Hold the button in excess of 0.7 seconds, it becomes a dimmer. The
light varies from ‘bright’ to ‘dim’ over approximately 8 seconds. This sequence
will reverse the light when it reaches the brightest or dimmest level if you
continue to hold the LIGHT button. Release the button when the desired level
is reached.
Auto Resume
Quick pressing (less than 0.7 seconds) on/off operation of the LIGHT button
maintains the desired brightness level set previously.
VERSA•TOUCH 2 ( W-73 ) OPERATION
Fan Control
To start the fan, press the selected speed button to run the fan
at the desired speed.
1=Low speed 2=Medium speed 3=High speed
To turn off the fan. Press the FAN OFF button.
Airflow Direction
To reverse the airflow press the REVERSE button. Reverse operates
at any speed whether fan is on or off. The fan returns to its set
speed after reversing.
Light Control
Turn the light on or off independently from the fan by pressing the
UP LIGHT/DOWN LIGHT OR BOTH button. (This is a rocker
switch. Press the left side for the Up Light, right side for the Down
light , and the middle for both.) Hold the button in excess of 0.7
seconds, it becomes a dimmer. The light varies from ‘bright’ to
‘dim’ over approximately 8 seconds. This sequence will reverse
the light when it reaches the brightest or dimmest level if you
continue to hold the LIGHT button. Release the button when the
desired level is reached.
Auto Resume
Quick pressing (less than 0.7 seconds) on/off operation of the LIGHT
button maintains the desired brightness level set previously.
Versa-Touch2 Wall Controls - CONTINUED