Owner`s manual

Heritage

Step 12d. Plug the male Molex plug into the female

Molex plug, aligning color and letters.

NOTE: The Molex plug will only connect if the letters

and colors are matched on both plugs. Do not force

the plug together.

Figure #4

Figure #1

MOLEX

PLUG

LIGHT FIXTURE INSTALLATION (OPTIONAL)

Step 13a. Remove the plug from the switch

housing. Figure #1.

Step 13b. Remove the Cut wire sleeves for the

included light switch and unscrew the knurl nut.

Figure #2.

Step 13. If you have purchased a Heritage™ II compatible light xture for your fan (KGC10W, KGC12W, or

KGC19W), you will need to prep your fan for this installation. Continue using these instructions until otherwise

noted. If you are not installing a light kit, skip to step 14.

Figure #2

CUT WIRE

SLEEVES

KNURL NUT