Owner`s manual

16
Step 13c. Locate the single blue wire labelled
"Connect Light Kit Black Wire Here" and the white
wire labelled "Connect Light Kit White Wire Here."
in the switch housing and remove the wire caps
Step 13d. Feed the light switch pull chain and the
end of the light switch through the hole in the switch
housing. Figure #3.
Step 13e. Feed the knurl nut back over the beaded
chain and screw onto the light switch.
Step 13f. Connect 1 blue wire from the light switch
to the blue wire previously exposed from the fan and
secure with the wire nut removed from it. Figure #3.
Step 13g. Feed the unattached blue wire from the
light switch and the unattached white wire from the
fan through the hole in the adapter plate. Figure #6.
Step 13h. Tuck all wires into the switch housing.
Figure #5.
Step 13i. Find the keyed slots on the switch
housing, and the notches on the adapter plate.
Line these up and assemble the adapter plate to
the switch housing with the 4 adapter plate screws.
Figure #4 and #5.
Figure #3
BLUE WIRES
LIGHT
SWITCH
TUCK
IN
WIRES
KEY
SLOTS
Figure #5
ADAPTER SCREWS
Figure #4