Owner`s manual

ManualsBrandsCasablanca ManualsFanC39G199L

P/N C3943001 RL1010

Safety and the proper operation of your Casablanca fan both require a thorough knowledge

of the product and proper installation; therefore, before attempting to install and operate your

Casablanca fan, read this owner’s manual completely and carefully. Retain this manual for

future reference.

CAUTION: To avoid possible electrical shock, make certain that electricity is turned off

at the circuit breaker or fuse box before attempting any installation procedure.

Antion

™

Owner’s Manual

READ AND SAVE THESE INSTRUCTIONS!

CONTENTS

Introduction _______________________________________________________________________5

Before You Start ................................................................................................................................................ 5

Safe Use ............................................................................................................................................................ 5

Mounting Recommendations .......................................................................................................................... 6

Sloped Ceiling Installation ............................................................................................................................... 6

Fan Installation ____________________________________________________________________7

Getting Started .................................................................................................................................................. 7

Mounting Bracket Installation .......................................................................................................................... 7

Fan Preparation ................................................................................................................................................. 8

Hanging the Fan ...............................................................................................................................................10

Wiring ............................................................................................................................................................... 11

Securing the Canopy .......................................................................................................................................13

Blade Installation .............................................................................................................................................14

Light Kit Installation .........................................................................................................................................15

W-74 Wall Control Preparation ........................................................................................................................18

W-74 Control Installation _________________________________________________________ 19

Installing the W-74 Wall Control ......................................................................................................................19

Single W-74 Installation ...................................................................................................................................19

Dual W-74 Installation ..................................................................................................................................... 20

W-74 Operation __________________________________________________________________ 21

Operation Power ............................................................................................................................................. 21

Operation Speed Control ............................................................................................................................... 21

Operation Reversing Airow ......................................................................................................................... 21

Operation Lights ............................................................................................................................................. 21

Changing Frequency Setting ......................................................................................................................... 22

Operation CFL Mode ...................................................................................................................................... 22

Automatic Demonstration Program .............................................................................................................. 23

Operation Safe-Exit® ...................................................................................................................................... 23

Light-minder® Program ................................................................................................................................. 23

Operation Fan-Minder™ Program ................................................................................................................. 24

Operation Home-Safe® Program ................................................................................................................. 24

Troubleshooting Tips _____________________________________________________________ 25

Troubleshooting tips _____________________________________________________________ 26

Care Recommendations __________________________________________________________ 27

Product Specications ___________________________________________________________ 27

Summary of content (14 pages)

PAGE 1
Antion™ Owner’s Manual READ AND SAVE THESE INSTRUCTIONS! Safety and the proper operation of your Casablanca fan both require a thorough knowledge of the product and proper installation; therefore, before attempting to install and operate your Casablanca fan, read this owner’s manual completely and carefully. Retain this manual for future reference.
PAGE 2
Parts List Antion™ Parts List Item # 24 20 23 25 22 21 26 4 5 36 35 33 10 54 17 52 53 55 56 Item Name Model # C39G199L Asm. Dwg.
PAGE 3
PLEASE INSPECT ALL PACKAGING PRIOR TO DISCARDING! Your Casablanca fan was crafted with pride and care and inspected thoroughly prior to shipment. Before you begin to assemble and install your Casablanca fan, remove all parts from the carton and check them against the Parts Guide in this manual. Make sure all parts are included in the box using the Parts Guide on the following pages. If there are missing or broken parts: Call 1-888-227-2178 Monday through Friday, 8 a.m. to 4:30 p.m. CST.
PAGE 4
Antion™ FAN INSTALLATION MOUNTING RECOMMENDATIONS Before mounting your Casablanca fan, read the following helpful recommendations. The location of the fan, air circulation, and fan size are all important factors to consider before installation. Location Ceiling fans have practical uses in almost every room in your home. We suggest you follow these mounting recommendations as you decide where to install your Casablanca fan. • For safety reasons, the fan blades must be a minimum of 7' above the floor.
PAGE 5
Antion™ MOUNTING BRACKET INSTALLATION (CONT.) Step 1. Align the slotted holes in the ceiling plate with the pilot holes you drilled in the wood support structure. For proper alignment use slotted holes directly across from each other. Step 3. Slide the Canopy, Trim Ring, Hanging Adapter Cover on to the pole, then route the wires through the 4.5" Perma•Lock downrod and ball assembly as shown in Figure #3.
PAGE 6
Antion™ WIRING HARDWARE Step 5. Slide the hanging adapter cover down over the motor coupling as shown in Figure #5, making sure that the adapter cover is covering the motor coupling as in shown Figure #6. Blue Wire Caps (3) Receiver Orange Wire Caps (3) WIRING Power From Ceiling Step 1. Locate the White Line Neutral (IN) and connect it to the White Neutral Wire from your ceiling using one of the supplied orange wire caps. FIGURE 5. Line Neutral (IN) Step 2.
PAGE 7
Step 6. Use the Red Fan Out Wire and connect it to the Red Wire coming from the fan with a blue wire cap. Antion™ CANOPY HARDWARE White-Neutral to Fan Canopy Screw (4) Red-Power to Fan Screw Driver SECURING THE CANOPY Canopy Screws Step 1. Carefully tuck the wires around the Receiver and Hanging Bracket as not to loosen the wire caps. Green from Mounting Plate Step 7.
PAGE 8
Antion™ LIGHT KIT HARDWARE BLADE HARDWARE Blades (5) Blade Irons (5) Blade Washers (5) Blade Screws (5) Blade Iron Screws (5) Screw Driver Glass Fitter Glass Bowl Light Kit Glass Fitter Screw (3) BLADE INSTALLATION Step 1. Attach a blade to a blade iron by first pressing the blade iron onto the blade, then attaching the blade iron using 4 blade screws and blade washers as shown in Figure #2. Using the provided screwdriver, tighten securely by hand only. Repeat for each blade assembly.
PAGE 9
Antion™ Step 6. To attach the Light Kit, partially install three Light Kit Screws into the Glass Fitter Plate. Figure 4. Step 13. Raise the Glass up to the Glass Fitter above the Light Kit. Step 14. Slide the Glass Cover onto the bottom of the glass Step 15. Screw the Finial onto the bottom of the Light Kit Stem to secure Light Kit. Glass Fitter Stem FIGURE 4. Step 7. Plug the Molex Plug from the Light Kit into the Opposite end from the Fan. Cover Step 8.
PAGE 10
1 Direct - Touch W-74 CONTROL INSTALLATION 2 W-74 WALL CONTROL PREPARATION 0 4 3 WARNING! To avoid possible electrical shock, make certain that electricity is turned off at the circuit breaker or fuse box before attempting any installation or repair procedure CAUTION! NOT turning the power OFF at the circuit breaker or fuse box may cause damage to the electronics within the wall control and or the PC board on the fan.
PAGE 11
1 2 DUAL W-74 INSTALLATION 0 4 3 To control the fan and lights from two locations (a three-way circuit), use two W-74 wall controls as shown in the wiring diagram in Figure #4. Before installing the two switches into the wall, place both switches side by side, then locate the 6 dip switches on the side of the two switches as shown in Figure #3. Then make sure that the dip switches are set to the same address on both switches as shown in Figure #3.
PAGE 12
1 2 Direct - Touch OPERATION CFL MODE 0 4 3 AUTOMATIC DEMONSTRATION PROGRAM 1 Your fan has the ability to disable the 2dimming feature to allow the use of CFL bulbs. 0 Caution: CFL bulbs will not function properly when 4 3 To activate CFL mode: dimmed, which may result in flickering or reduced bulb 1. Turn the fan off by pressing the power button. life. 2. Allow the fan to remain off for at least 5 seconds. 3. Press the power button again to restore power to the fan.
PAGE 13
1 1 2 0 4 3 Antion™ 2 0 1 2 OPERATION HOME-SAFE® PROGRAM 4 3 0 1. To operate the Home-Safe Program – Turn the 4 3 least 5 seconds. power button off for at 2. Turn the on. Immediately press and hold the "3" button for 5 seconds. A series of tones will be heard through the piezo-buzzer indicating the command has been accepted. Note: This program overrides all manual control of lights and fan. 1 off in 2a controlled sequence as 3.
PAGE 14
CARE RECOMMENDATIONS Fan Finishes • For cleaning, a soft brush or lint-free cloth should be used to prevent scratching the finish. • A vacuum cleaner brush nozzle can remove heavier dust. • Surface smudges or an accumulation of dirt and dust can be removed easily using a mild detergent and slightly dampened soft cloth. An antistatic agent may be used, but never use abrasive cleaning agents as these will damage the finish. Blades • Wood-finish blades should be cleaned with a furniture polishing cloth.