User's Manual

6
the camera's current view.
Indicator Description
Live View
1. Signal indicator: Shows the strength of the signal being received from the camera. If an 'x'
shows up on the signal bar, then the system is "out of range".
2. Digital Clock: Displays the time that is set on the monitor.
3. Camera number: Indicates which camera is being displayed on the current screen
4. Remote monitoring: Indicates remote monitoring status. When remote monitoring is turned on
(in white), that means cell phone/App is remote visiting camera remotely, if not then the is in
grey.
5. Zoom mode: Indicates Zoom mode. x1/x1.5/x2
6. Monitor Speaker Mute: Indicates the monitor's speaker is muted
7. Battery Power Level: Shows the battery status.
• Battery Status
A battery charge state indicator within the LCD will show the level of charge indicating five states, including
alert (flashing red battery outline), 1/4, 1/2, 3/4 and full.
Low battery: Flashing Red
¼ Battery fill: Red
½ Battery fill: White, 1 bar
¾ Battery fill: White, 2 bars
Full Battery fill: White, 4 bars (the power supply is not connected)
Full Battery fill with charging: White and lightning bolt icon alternately (the power supply is connected)
When the power supply is connected the lightning bolt icon displayed over the centre.
8. Temperature Display: Shows the temperature of the camera (baby) room.
9. Feed time counter: A countdown clock of the feed time.
10. Night Light On/Off: Indicates if the night light is on or off. You can control the night light on the
camera remotely from monitor side.
11. Quad Mode : Press this button to switch to quad mode. When two cameras are paired, there will