User's Manual
14
6.2.1Language
Select the system language you want to use. The default language is English.
6.2.2TimeSetup
If you choose to sync time with the server for the system, you need to choose the correct
time zone where the system is used.
If you choose not to sync the time with the server, you can set up the system date and time
manually here.
6.2.3WirelessInternet
To use the Remote View feature for the system, you need to enable the WLAN on the NVR.
We recommend using DHCP for the device. Check the Network Setup to see if DHCP is
enabled. If not using DHCP, you can also set up your own IP Address for the device.
Go to Hotspot list to choose a WiFi network for your device. Select your WiFi and input
the password for the router.
After you successfully add the device to your router, you can see the network status on
the screen.