User's Manual


7
2 Lens
Catches the video in front of the lens and transmits video from
camera to Monitor.
3 Working Indicator
Indicates the working status of camera. (Green LED)
Flashing rapidly——Ready to pair/ pairing mode
Solid green——Paired / working
4 PIR sensor
Detects motion in front of the lens and emits detection signal to
transmitter.
5 Speaker Produces the sound transmitted from the monitor.
6 IR LED Infrared LEDs provide viewing in no/low light conditions.
7 Bracket
Use the bracket to mount the camera on a wall or other flat
surfaces.
8 Camera antenna Receives & Sends signals to or from the Monitor.
9 Reset button
The reset button is located on the back of the camera. Press and
hold the reset button (until the indicator LED flashes) to reset the
camera.
10 Light sensor
Sensing light and give order to the IR cut to switch between
daytime and night vision mode.