User's Manual

2. Install and set up the camera

a. Go to your phone WiFi Settings, and connect your phone to the router which you

want to register WL100 to via 2.4G, do not connect the router through 5G

b. Open TuyaSmart, touch “Add Device” at the bottom, select “Security & Sensor” from

the left category, and then select “Smart Camera”

Power on your WL100 camera, there will be an audible alert (a short music) and then the

indication LED (working indicator) will be fast flash and with “du-du” sound about every 17

seconds, (if the camera LED is not in fast flash and no “du-du”, pls reset the camera by

pushing and hold the reset key at the rear of the camera for 5 second).

Go to the next step, input your home router WiFi password, create a QR code, let camera scan

the QR code, once you hear an audible sound（du---）, means the camera scan QR code

successfully, after a while APP shows connect successfully and the camera indication LED will

change to solid green, means camera connected to router successfully.

NOW YOU CAN USE YOUR SMART PHONE TO CONNET TO YOUR CAMERA, WATCH

LIVE VIEW, PLAYBACK, TWO WAY TALK ETC. FREELY