Instruction Manual

14
15
REMOTE CONTROL
1| POWER
Switch the device on/off.
2| AUTOMATIC PROGRAMME
The massage device is equipped with 3 automatic programmes. Press [Programme] and
choose between CALM (blue LED), REFRESH (green LED) and RECOVERY (red LED).The
motor resets after each selection. The massage device only starts the automatic programme
afterwards.
3| HEIGHT ADJUSTMENT
If you have chosen [Automatic programme] / [FULLBACK] / [UPPER] / [LOWER], press
[Height] to activate the height limitation function. To return to the maximum height, press
[Height] again.
4| HEATING
The [Heating] function is active at the start of the programmes [Tapping]/[Shiatsu]/
[Auto]. To switch the heating function off or on again during the massage, press the
button again.
5| VIBRATION
The [Vibration] can be switched on or off at any time during the functions [Tapping]/
[Shiatsu]/[Auto]/[Area]. Press the [Vibration] button to start the vibration function. The
vibration runs on a 1.5 minute cycle.
6| SHIATSU
Press the [Shiatsu] button to start the Shiatsu function. The standard speed is medium.
If the massage device is running in auto mode, the auto mode will thus be stopped. To
end, press [Shiatsu] again.
7| TAPPING
Press the [Tapping] button to start the Shiatsu function. The standard intensity is medium.
If the massage device is running in auto mode, the auto mode will thus be stopped. To
end, press [Tapping] again.
8| SLOW | FAST
The tapping speed can be set to three levels: fast-medium-slow. The functions [Slow] and
[Fast] only run when [Tapping] is selected. Press the [Slow] button to reduce the tapping
speed and the [Fast] button to increase it.
9| SLOW – FAST | FAST – SLOW
The functions [Slow – Fast] and [Fast – Slow] only work when [Tapping] is selected.
Press one of the two buttons and the intensity changes automatically for the duration of
the massage, from slow to fast or from fast to slow.
10| WIDTH
The [Width] function only works when [Tapping] is selected. [Width] is not possible
in the [Shiatsu] function. Each time the [Width] button is pressed, the width of the
massage rollers adjusts in 3 steps, from narrow to wide. When the [Width] button is
pressed for a 4th time, this activates an automatic run-through of all the width settings.
11| LO | HI
The Shiatsu intensity can be set to three levels: fast-medium-slow. The functions [LO
Shiatsu Speed] and [HI Shiatsu Speed] only run when [Shiatsu] is selected. Press the
[LO Shiatsu Speed] button to reduce the Shiatsu intensity and the [HI Shiatsu Speed]
button to increase it.
12| UP | DOWN
Control keys for the massage rollers for exact positioning on your back.During the
localised massage you can alter the massage area upwards or downwardsby holding
down these buttons.
13| FULLBACK
Basic programme for the entire back. The programme massages the individual sections
of the back using the “rolling” massage technique. The functions [Tapping]/[Shiatsu]/
[Heating]/[Vibration] can be turned on optionally.
14| UPPER
Basic programme for the upper back. The programme massages the individual
sections of the back using the “rolling” massage technique. The functions [Tapping]/
[Shiatsu]/[Heating]/[Vibration] can be turned on optionally.
15| LOWER
Basic programme for the lower back. The programme massages the lower sections of
the back using the “rolling” massage technique. The functions [Tapping]/[Shiatsu]/
[Heating]/[Vibration] can be turned on optionally.
Remote control
CALM: Just lean back, tune out, rest, relax and recover.
REFRESH: Fight the signs of fatigue and regain your energy.
RECOVERY: Penetrating massage techniques. Ideal massage for strengthening and
relieving your back.
REMOTE CONTROL
Remote control