Instructions / Assembly

retention point

Figure 10

Figure 11

black handle

10. Open the door panel (D). Place the gas cylinder into the gas cylinder support (K) and connect the regulator by

turning the black handle clockwise to tighten. To remove the regulator, turn the black handle counter-clockwise.

Secure the gas cylinder by tightening clockwise the retention point found on gas cylinder support (K), (see Figure

10), so that the gas cylinder cannot move from side to side or fall down. The knob on the control panel is turned

all the way to the “OFF” position when the fire pit in NOT in use.

11. Once the firepit has cooled completely after use, carefully place the lid (A) onto the fire bowl and use the weather

cover (M) to protect your fire pit from the elements, (see Figure 11).

WARNING: Allow 30 minutes after use for fire pit to cool down before placing the lid to prevent scalding.