Installation Guide

11
NOTE: It is strongly Recommended that the mounting bracket(d) be screwed into the wall studs where possible.
If the wall studs cannot be used, ensure that the supplied plastic anchors are used to affix the bracket to
the wall and the bracket is adequately secured.
F. With the wall mounting bracket installed have two people lift the appliance up and insert the two hooks
on the bracket into the two slots on the back of the appliance.Use original 4x8mm screws to fasten wall bracket.
G. Check the appliance for stability ensuring that the bracket will not pull free from the wall.
H. Place the front panel lock the appliance.Fig.7
Fig.5 Fig.6
Fig.7