Installation Guide
1. Attach nipple(-a) to the mounting strap, then secure
it with a washer and hex nut.
2. Attach the mounting strap to the outlet box by
using two mounting screws.
3. Secure the top loop to nipple(-a).
4. Secure the loop onto nipple(-b).
5. Choose the length of the chain you need, then weave
the fixture wire and the fixture grounding wire through
the chain, collar and canopy.
6. Connect one end of the chain with the loop by using a
loop lock.
7. Connect the other end of the chain with the top loop by
using another loop lock.
8. Thread the fixture wire and fixture grounding wire through
the top loop, nipple(-a) and mounting strap.
9. Pull out the outlet wires and house grounding wire from
the outlet box. Make wire connections using the wire
nuts:
---The smooth wire (marked) from the fixture to the black
wire from the power source.
---The ridged wire (unmarked) from the fixture to the
white wire from the power source.
---Attach the fixture grounding wire to the mounting strap
with the green grounding screw. Then connect it to the
house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
10. Attach the canopy to the mounting strap by inserting the
top loop, then secure it with the collar.
11. Attach the glass shades to the glass holders, then secure
them with socket rings.
12. Install bulbs (not included). See
relamping label at socket
area or packaging for maximum
allowed wattage.
13. Turn on the power at the main
fuse or circuit breaker box.
Nipple(-b)
Fixture
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THIS INSTRUCTION.
AL-PDD360
071013
Outlet Box
House Grounding Wire
Wire Nut
Fixture Wire
Fixture Grounding Wire
Mounting Strap
Green Grounding Screw
Mounting Screw
Nipple(-a)
Canopy
Top Loop
Hex Nut
Washer
Collar
Loop Lock
Loop Lock
Chain
Loop
Glass Holder
Glass Shade
Socket Ring