Installation Guide

Fixture
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT
OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
VL27652/VL27653/VL27654
Installation Steps:
Bolt Nut
Mounting Screw
Screw
Lock Nut
Cross Bar
Grounding Screw
Wire Nut
Wall Box
Grounding Wire
Fixture Wire
House Grounding Wire
Glass Shade
Socket Ring
1. Thread the 2 screws through the cross bar, and secure with 2 lock nuts.
(You can adjust the length of the screws if necessary.)
2. Attach the cross bar to the wall box by using 2 mounting screws.
3. Make wire connections with wire nuts:
---Connect the black wire from fixture to the black wire from power source.
---Connect the white wire from fixture to the white wire from power source.
---Attach the grounding wire and the house grounding wire to the cross
bar with a green grounding screw.
Carefully tuck wires back into the wall box.
4. Attach the fixture to the cross bar by inserting the screws, and secure
with the bolt nuts.
5.Attach the glass shades to the fixture, and secure with the socket rings.
6.Install bulbs. (Please do not exceed the maximum capacity, which is
recommended on the package.)
7.Turn on the power at fuse or circuit box.