Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRIC SHOCK, BE SURE TO SHUT OF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
WL35121/VL35122/VL35123/VL35124
Installation Steps:
1.Unscrew the bolt nuts from the fixture, and remove the mounting plate.
2.Attach the mounting plate to the wall box by using 2 mounting screws.
3.Make wire connections with wire nuts:
---Connect the black wire from fixture to the black wire from power source.
---Connect the white wire from fixture to the white wire from power source.
---Attach the grounding wire and the house grounding wire to the mounting plate with a
green grounding screw.
Tuck wires back into the wall box carefully.
4.Reattach the fixture to the mounting plate by inserting the 2 screws, and secure with
2 bolt nuts.(You can adjust the length of the screws by screwing the lock nut .)
5.Attach the glass shades to the fixture, and secure with the socket rings.
6.Install bulbs. (Please do not exceed the maximum capacity, which is recommended
on the package.)
7.Turn on the power at fuse or circuit box.
Mounting Plate
Mounting Screw
Lock nut
Grounding Wire
Grounding Screw
Bolt Nut
House Grounding Wire
Fixture Wire
Wire Nut
Wall Box
Screw
Glass Shade
Socket Ring
Fixture