Installation Guide

1. Attach the nipple to the mounting strap, then secure it with
a washer and hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Two sizes of the pipes, 3＂L (x2) and 9 1/2＂L (x6), are
attached in the hardware package, choose the desired
installation height you need. Then thread the fixture wires
through the pipes and nipples as shown in the right graph.
The height can be adjustable to 22-1/4＂, 31-3/4＂or
41-1/4＂by using the pipes.
4. Screw all pipes together until securely by using the nipples,
and then lock to the bar securely.
5. Slide the canopy down through the nipple
of the top pipe, secure them respectively
with spring pads, hex nuts and grounding
pad. See the graph for correct location.
6. Pull out the outlet wires and house
grounding wire from the outlet box.
Make wire connections using the
wire nuts:
---The black wire from the fixture to the
black wire from the power source.
---The white wire from the fixture to
the white wire from the power
source.
---Attach the fixture grounding wire
to the mounting strap with the
green grounding screw. Then connect
it to the house grounding wire with a
wire nut.
Carefully put the wires back into the
outlet box.
7. Attach the canopy to the mounting strap
by inserting the nipple, then secure it
with finial.
8. Attach the glass shades to the glass holders, then secure them with
the socket rings, using supplied socket ring fixer.
9. Install bulbs (not included). See relamping label at socket area or
packaging for maximum allowed wattage.
10. Turn on the power at the main fuse or circuit breaker box.
081205
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THIS INSTRUCTION.
OX-CFD280
Wire Nut
Mounting Screw
Nipple(-a)
Canopy
Mounting Strap
Green Grounding Screw
Hex Nut
Washer
Outlet Box
House Grounding Wire
Fixture Grounding Wire
Finial
Top Pipe
Nipple
Pipe
Bar
Glass Holder
Glass Shade
Spacer
Socket Ring
Nipple
Lock Ring
Hex Nut
Washer
Grounding Pad
Metal Pad
Socket Ring Fixer
Bulb Type A Max.100W
(not included)